Check out the Cape Cod Remix! We originally released this collection in May of 2013, and it flew off the shelves. High time for a re-release, don't you think?
Remember, the Cape Cod Remix is a special release and will not ship automatically.
Cape Cod Remix Layouts
LAYOUTS 1 & 2
Top the anchor woodcut with a twine bow and adhere to the cutapart with CS® Bookbinding Glue applied with a needle-tipped applicator. Place a heavy object on top of the anchor until the glue bonds with the paper. Add a few pieces of lighthouse washi tape above the cutapart.
Wrap blue grosgrain ribbon around the cutapart and tape the ends on the back. Add a bow to an anchor woodcut and adhere using the same method.
Cut along the edge of the lighthouse in the lower right corner of the cutapart. Keep the area free of adhesive. When completing the page with photos, slide the corner of the photo behind the lighthouse.
LAYOUTS 3 & 4
Round the corners of the cutapart with a corner punch or Corner Chomper on the 1/4" setting and adhere to the nautical tag with foam adhesive. Top the tag with gray/white twine.
Cut a slot along the edge of the flip-flop image to accommodate the Gray photo mat.
LAYOUTS 5 & 6
Cut along the edge of the lighthouse within the frame to allow the photo to slip behind the image.
LAYOUTS 7 & 8
Cleverly position a piece of the lighthouse washi tape behind the anchor cutout in the nautical tag.
Father's Day Option
And now, for the best part, you can choose to receive the Cape Cod Remix as shown above, or you may select the Cape Cod Father's Day version. In addition, the Father's Day cutaparts can be purchased separately. The cutapart sizes are fully interchangeable if you have a limited number of Father's Day photos to scrapbook.
I hope your summer is off to a great start! Take lots of pictures. We'll help with the rest.
Tricia